VooDoo Shorty Custom Polished Vecp 1.95-2.20 Inches Exhaust

VooDoo Shorty Custom Polished Vecp 1.95-2.20 Inches Exhaust is a VooDoo motorcycle exhausts part. Order by manufacturer part number VECP to match this exact listing and finish. Compare the application notes with your bike before choosing a part.

Fitment and application

Universal application as described in the manufacturer notes below. Check dimensions and mounting before ordering.

Manufacturer specifications and included parts

Use this as an option when our Shorty application chart does not have a bolt-on fitment for your bike or situation.

• Right side exit Shorty polished muffler 12 inches long, 3 inches outer diameter, with a very slight angle pitched out (aprox. 4 degrees).
• Measure the outer diameter to the .001 of the tubing you will be clamping the VooDoo Exhaust muffler OVER. Use digital calipers to measure.
• Minimum sizing of 1.95 inches inner diameter.
• Maximum sizing of 2.20 inches inner diameter.
• Do not use a measuring tape or ruler, they are not accurate enough.
• Example: GSX-1300R Hayabusa has an aftermarket full exhaust and you want a VooDoo Exhaust Muffler.
• Remove the muffler and mid-pipe, measure the outer diameter of the outlet off the 4 into 1 collector where the muffler will bolt on.
• Make a mock up and check for clearance then place your order indicating the outer diameter specs in the notes section and include what exhaust is on your bike now, what make/model of bike.
• Your new VooDoo Exhaust muffler is supplied with a clamp and will be manufactured to mount OVER your measurement given.
• NOTE: This part is non-returnable and non-refundable once sized to customer specs. Installer is responsible for fitment, clearances, and any support brackets if needed.
• Power Commander may be required for proper fuel management.

Call if you have any questions and we will walk you thru it
Office: 1-(440) 653-5333

Before you install

Check the part number, mounting points and any manufacturer fitment restrictions against your exact motorcycle and its current equipment. A matching model name alone does not confirm compatibility with modified bikes. Review the manufacturer notes for required supporting parts and any exclusions. Test-fit before painting, coating or permanently modifying a component, and retain the packaging until fitment is confirmed. Installation by a certified motorcycle mechanic familiar with this product is recommended.

Sound and exhaust configuration

Read the manufacturer notes above for this exhaust design and configuration. Muffler choice, the existing exhaust system and engine setup affect the result. Do not assume that a sound clip from another motorcycle represents this application. Confirm whether the listing is a full system, slip-on, individual component or set before ordering; use only the included-parts information stated by VooDoo.

Emissions notice

Emissions-related part. Not legal for street use in California or on pollution-controlled vehicles. Cannot ship to California addresses. Check the manufacturer restrictions and our emissions notice before ordering.